Schluter DITRA-HEAT-PS Floor Heating Uncoupling Membrane Panel Peel & Stick 2′ 7″ x 3′ 3″ – 5 mm (8.4 sqft)
SPECIFICATIONS
APPLICATION
Description
Schluter-DITRA-HEAT-PS is a peel and stick membrane that features a pressure-sensitive adhesive (PSA) to bond the membrane to the substrate, eliminating the need for thin-set mortar. Quick and easy to install, DITRA-HEAT-PS integrates customizable, comfortable electric floor warming with the same functions associated with DITRA-HEAT: uncoupling, waterproofing, vapor management, and load support to ensure a long-lasting tile installation.
- Simply remove the transparent release film from the fleece side of the membrane to expose the layer of adhesive
- and embed into substrate
- No thin-set required to install membrane means a faster and easier installation
- The membrane can easily be repositioned until pressure is exerted
- Less mess
- less cleanup
- and fewer tools required
- The stud structure of DITRA-HEAT-PS is specifically designed to allow for the easy installation of DITRA-HEAT-HK heating cables
- Nominal 1/4″ (5.5 mm) thickness minimizes tile assembly thickness and reduces transitions to lower surface coverings
- Self-leveling compounds are not required to encapsulate the cables into the membrane
- If application area requires a membrane that meets or exceeds requirements of ANSI A118.10
- please refer to thin-set versions of DITRA-HEAT and DITRA-HEAT-DUO. Alternatively
- the DITRA-HEAT-PS or DITRA-HEAT-DUO-PS membranes may be covered with the Schluter-KERDI membrane
- which is certified to meet ANSI A118.10
